04/11/2015 - Bug Fix Feedback - Test Server

[Pwnuts]

1.) Level terrain donw do not gain dirt, lower terrain still gain dirt and now removes the dirth under an architecture - is that a change again or a new bug? please check testserver zone 978 X671.5 Y517.0

2.) i would need to find a container of a player who does not exist anymore - atm unable to test

3.) it counts to picks skill again. uses get added after leaving combat mode or proolly after a certain time if i stay in combat mode.

4.) works now

5.) works now

6.) all 4 diffrent log walls require 3 logs now - i didnt check for corners.

7.) works now

8.) nope. i used a gadu 8x8 truss and a mason brick roof 8x8 this time. tried to move a banaya spiked wall inside the buildings. i still get the msg: Gadu Brick Roff 8x8 / Gadu Truss 8x8 - is in the way"

[Xsyon]

1.) Level terrain donw do not gain dirt, lower terrain still gain dirt and now removes the dirth under an architecture - is that a change again or a new bug? please check testserver zone 978 X671.5 Y517.0

I checked the exact location on the Test Server (current build from today). I couldn't dig down and I didn't gain dirt when lowering terrain.

Could you please check this location the current Test Server?

If you can lower terrain under buildings at any location, please give me the following information:

- exact location (again)
- name of the building part you are digging under
- screenshot showing the dirt dug beneath the building

8.) nope. i used a gadu 8x8 truss and a mason brick roof 8x8 this time. tried to move a banaya spiked wall inside the buildings. i still get the msg: Gadu Brick Roof 8x8 / Gadu Truss 8x8 - is in the way"

Ok. The previous fix was regarding 'room' objects only (not walls), although with the current Main Server builds you should be able to slide walls into the center of 8x8 trusses and roofs. They have to be perfectly aligned.

However, on the current Test Server, this should be much easier to do. Both 'rooms' and walls should not collide with trusses or roofs when building. Walls should be able to be placed anywhere on a 8x8 X (new part) truss, as long as the ends of the walls are supported. If you can check, please do.

In addition: When you craft bins, they should be set to private locks and private permissions now when first placed. Please confirm this.

Thanks!

[Pwnuts]

8.) looks good now

1.) please check the location i already posted. the testserver is on with a current backup and the wole i made was gone. i reproduced it another time on the same spot and it's still working. i also tried another position and it does not work.

the place i was able to do does not have any trusses since its a old building. on the housing of a member who used trusses its not working anymore. i suppose its not because of trusses, but maybe this iformations help you to see the error somehow.
Its a Mason Granite Wall, and the locations is

zone 978 X671.5 Y517.0

again