Stuck on trusses
issueid=2160 04-11-2015 10:54 PM
Xsyon Citizen
Stuck on trusses
if you build a house (16x16) using 4 times a 8x8 (currently bug happend with the gadu one ) truss and try this: build a ramp inside one of the trusses in the direction and at the border to another truss, put a floor on the other truss which connects the ramp on the top, a new problem causes.

if you now go up the ramp, you will stuck on a horizontal frame of the 8x8 truss before you hit the floor.
currently a player can fix this by moving the ramp 0.2 away from the floor, but then the ramp can cause new problems if you try to build next to it couz its not on the position where it's supposed to be.

ope my explaination was understandable, if not i can rebuild it and post a screen.
This issue is closed. No more replies may be made.
Issue Details
Issue Number 2160
Issue Type Bug
Project Bugs Reports
Category Code - Collision
Status Fixed / Resolved
Priority 3
Affected Version Unknown
Fixed Version (none)
Users able to reproduce bug 0
Users unable to reproduce bug 0
Attachments 0
Assigned Users (none)
Tags (none)




04-17-2015 07:33 PM
Yes, please post a screenshot or give me a location (on the Test Server) to see this directly.

Thanks!
 

04-18-2015 02:37 AM
Xsyon Citizen
need to build it first, but i'll do.
 

04-19-2015 03:36 AM
Xsyon Citizen


everything is build on the grid. you can see that the horizontal frame of the truss is higher than the ramp currently. if i would complete this the frame would stop me moving up there. without jumping i'm not able to pass the frame. i didnt complete it this time, just an example. but i build the same before and figured the bug. i'm sure it wont take long to build and add materials to reproduce for you, since you prolly want to test it yourself anyway.
 

04-20-2015 03:00 AM
Xsyon Citizen
For me it depends on what speed your moving at and how badly encumbered you are, the normal "jog" while carrying very little and you'll get over it every time, but walk, sprint or carry to much and you'll trip over it every time.
One tip is to build the ramp on a floor that way the top of the ramp is 0.2 higher, which leaves you with less of a "lip" to get over, another is to build the ramp in the middle of an 8x8 truss that way you don't have anything in the way.
 

04-20-2015 03:04 AM
Xsyon Citizen
i recently move the ramp 0.2 away but this way i create a gap abd on the lower pint of the ramp i wont be able to put another floor. imo its a bug and i'm sure xsyon will find a way to fix it.
 

Closed